不銹鋼產品的公差范圍
(注:可根據客(ke)戶需求商議指定(ding)公差)
| 分條公差（單位：mm） | ||||||
| ?寬度厚度 | 0.05-0.15 | 0.16-0.35 | 0.36-0.51 | 0.52-0.6 | 0.6-0.9 | 0.91-1.5 |
| 10-100 | ±0.04 | ±0.05 | ±?0.08 | ±?0.08 | ±?0.1 | ±?0.12 |
| 101-450 | ±?0.05 | ±?0.06 | ±?0.08 | ±?0.08 | ±?0.1 | ±?0.12 |
| 451-820 | ±?0.08 | ±?0.06 | ±?0.1 | ±?0.1 | ±?0.1 | ±?0.12 |
| 切片公差 | ||
| 長度 | 長度公差 | 對角線公差 |
| 150-1500 | ±?0.4 | ≤?0.7 |
| 1501-2800 | ±?0.5 | ≤?1.2 |
| Unit?:?mm?(millimeter) | ||
| 鋼帶厚度允許偏差 | ||||
| 公稱厚度 | 厚度允許偏差（單位：mm） | |||
| 寬度﹤125 | 125≤寬度﹤250 | 250≤寬度﹤600 | 600≤寬度﹤800 | |
| ≥0.05～0.20 | ±0.0025 | ±0.0025 | ±0.0025 | — |
| ≥0.20～0.30 | ±0.005 | ±0.005 | ±0.005 | ±0.005 |
| ≥0.30～﹤0.5 | ±0.01 | ±0.01 | ±0.01 | ±0.01 |
| ≥0.5～﹤1.0 | ±0.015 | ±0.015 | ±0.015 | ±0.015 |
| ≥1.0～1.5 | ±0.02 | ±0.02 | ±0.02 | ±0.02 |